You can switch File History to a new drive by turning off backup to the current drive and then selecting the new one. Windows may then offer to migrate your existing backup content from the previous drive to the new one. [1] You may also find this useful: File History Drive Disconnected Error.
People usually make the move because they need a larger USB drive, as in one Microsoft Q&A question dated Aug 12, 2023. [2] Another common reason is a drive that is failing and needs replacing.
This article walks through the switch in order, explains what happens to the backups already on the old drive, and covers the mistakes that can trip you up along the way.
What should you know before you switch?
Plan a few minutes of prep before you switch: get the new drive connected and visible, and leave the old drive alone until the new one is working.
Connect the new drive first
Plug in the new drive and confirm Windows sees it. Open File Explorer and look for the drive under This PC. If it does not appear there, Windows will not offer it as a File History target later.
Old backups stay on the old drive
Your existing backups live on the old drive. Windows may offer to migrate that backup content to the newer drive when you select it, but you should not count on it. [1] Until you have confirmed the new drive is backing up properly, keep the old one stored somewhere safe and connected only when needed.
Windows 11 is the focus, Windows 10 is close
This guide is written for Windows 11. File History works the same way on Windows 10: you stop using the current drive, then pick another one. [1] The differences are minor menu locations, which the steps cover. Windows 10 has reached end of support, so consider planning an upgrade when you have time. You may also find this useful: How to Enable File History in Windows 11 and 10.
Safety before you change anything
Back up your important files first. Copy documents, photos, and anything irreplaceable to a second location, such as another external drive or cloud storage, before you touch backup settings.
Do not erase or reformat the old drive until the new backups are confirmed. It may hold the only copies of older file versions.
Make sure the new drive is large enough and stays connected while backups run.
With the drive connected and a spare copy of your key files made, you are ready to make the change.
How do you switch File History to a new drive?
Switching takes four moves: stop backing up to the old drive, pick the new one, accept the migration offer, and turn File History back on. The steps below use the Windows 10 Settings path and the Control Panel route, since those are what the sources show.
Open File History. Open Control Panel and select File History. [1] Windows 10 users can instead go to Settings > Update & Security > Backup and click the More options link under Back up using File History. [1]
Turn off the old drive. In the File History window, click the Turn off button for the currently selected drive to stop backups to it. [1] In the Settings app, scroll down to Back up to a different drive and click Stop using drive. [1]
Pick the new drive. In Control Panel, click the Select drive link in the left pane and choose the new drive. [1] In Settings, click the back arrow, then use the Add a drive button. [1]
Accept the move. Windows will ask whether you want to migrate the data from the existing File History drive to the new one. Say yes if you want your earlier backup content to follow. [1]
Turn File History on and run a backup. Back in the File History window, turn it on again so backups go to the new drive. Then use Run now to start the first backup instead of waiting for the schedule.
The File History window should now show the new drive as your backup location.
Windows 11 versus Windows 10
Windows 10 reaches File History through Settings > Update & Security > Backup. [1] Windows 11 users can reach the same File History tool through Control Panel, which is the route in step 1, so the steps after that are the same. [3]
What happens to the backups on the old drive?
Your old backups don’t vanish when you switch drives. Windows can copy them to the new drive, and the old drive keeps its own copy either way.
Windows can migrate the old content
After you stop using the old drive and pick a new one, Windows allows you to migrate backup content from the previously used drive to the newer one. [1] If you accept, your earlier file versions are available on the new drive, so you start with history rather than a blank slate.
The prompt appears as a question when you add the new drive. For example, if you move from a small USB drive to a larger one, saying yes brings the existing backup content along. [1]
Keep the old drive for older versions
If you skip the migration, the older file versions stay on the old drive. Putting that drive in a drawer, rather than wiping it, keeps those versions available for restoring later.
This matters most if you are moving because the first drive was too small. People in that situation commonly look to move File History to a larger USB drive, and the older drive still holds what it backed up. [2]
Restoring from the old drive later
You can still get files back from the old drive by reconnecting it. Plug it in, and its backups become available to restore from, just as before you switched.
A practical example: you deleted a budget spreadsheet last spring, before the move. The new drive may not have that version if you didn’t migrate. Reconnecting the old drive gives you a place to look for it.
The restore steps themselves are covered in the separate article on restoring files from File History.
What mistakes should you avoid when changing drives?
Most problems with a File History move come from four avoidable slips. None are hard to prevent once you know them.
Unplugging the drive mid-backup
Don’t pull the new drive while a backup is running. File History saves copies of your files on a regular schedule, so an interrupted run leaves that round of copies unfinished. [4] Let the first backup finish, then disconnect the drive only when you actually need to.
Reformatting the old drive too soon
Resist the urge to wipe the old drive the moment the new one is selected. Your earlier file versions may still live only there, and they are what you restore from if something goes wrong later. Reuse the old drive only after you have seen the new one back up your files.
Forgetting to confirm the folders being backed up
A new drive does not guarantee the same folders are protected. File History backs up a set of folders, and you can add or exclude folders in its settings. [3] Open the backup options after switching and look at the folder list, so a project folder you rely on isn’t quietly left out.
Choosing a drive that is too small
Pick a drive with real room to spare. File History keeps versions of your files over time, not just one copy, so the backup grows well beyond the size of your documents. [4] If you are moving because the old drive filled up, a new drive of similar size will fill up the same way.
For example, if you keep large photo or video folders in your user profile, either choose a bigger drive or exclude those folders so the backup doesn’t outgrow the disk.
Quick questions about changing the File History drive
Can I use a network location instead?
Yes, in many cases. The File History drive selection screen in Control Panel includes an option to add a network location, so you are not limited to a USB drive. The source text for this answer is truncated, so the exact steps are not shown here. Look for the network location option on the Select drive screen after you turn off the current drive.
Do I lose old versions if I switch?
Not if you keep the old drive. When you stop using a drive and select another, Windows will let you migrate the backup content from the previously used drive to the newer one. [1] If you accept, your earlier versions come along. If you decline, they stay on the old drive, so keep it until you no longer need those versions.
Can I switch back to the old drive later?
Yes. The process is the same in reverse: turn off backup to the current drive, then select the old drive again. In Control Panel, that means clicking the Turn off button for the selected drive and then the Select drive link in the left pane. [1] In the Settings app on Windows 10, you stop using the drive and then use the Add a drive button. [1]
Because the new drive will have collected its own backups in the meantime, Windows may offer to migrate content again. Choose whichever option fits what you want to keep.
Wrapping up your File History move
Remember the order: turn off File History on the old drive, select the new drive, and accept the migration if Windows offers it. Windows then lets you move your backup content from the previously used drive to the newer one. [1]
Your next step is to run a first backup on the new drive and confirm it finishes. Keep the old drive set aside, untouched, until you have seen the new backups work. Only then decide what to do with it.
