You can turn on File History in a few minutes, as long as you have a drive to save to. It is a built-in Windows backup tool that saves versions of your personal files, so you can bring back an earlier copy if a file is lost or damaged. [1][2] It also helps to read How to Switch File History to a New Drive in Windows.
File History stays off until Windows finds a suitable location, such as an external drive or a network drive. [1] If you open it and nothing happens, a missing drive is the usual reason, not a broken setting.
This article shows how to enable File History in Windows 11 first, then notes what changes in Windows 10, and covers choosing which folders get backed up.
Key takeaways
File History saves versions of your files, not just one copy. [2]
It stays off until a suitable drive is available. [1]
Windows 11 steps come first, with Windows 10 differences noted.
What do you need before you start?
You need two things before you start: Windows 8 or later, and a backup location that is separate from your PC’s main disk. File History is available in all versions of Windows starting with Windows 8, so any current PC qualifies. [3]
A drive or network location to back up to
File History only saves to an externally connected drive, such as a USB drive, or to a network drive. [1] If neither is available, it stays off. [1] A flash drive or external drive both work as the destination. [4]
The drive should not be your internal disk. Backups kept on the same disk are lost if the whole system fails. [4] One guide also says the external drive can be formatted as FAT32 or NTFS. [2]
What gets backed up
By default, File History backs up the folders in your user folder (C:\Users\Username). [1] That covers personal folders such as Documents, Music, Pictures and Videos, plus Desktop. [1][4]
So if you keep school papers in Documents and photos in Pictures, they are covered without any extra work. It is not a full-PC backup: it copies specific files and folders rather than the entire C: drive. [3]
Windows 11 and Windows 10
Windows 11 is the focus of this guide. Windows 10 is past or near the end of support, so plan to move to Windows 11 if your PC allows it. The File History steps are similar on both.
How do you enable File History in Windows 11?
You can turn on File History in Windows 11 in four steps, and the whole process runs through Control Panel.
Connect the backup drive. Plug in an external drive or a flash drive. A network drive also works. [4] Without one of these locations, File History stays off. [1]
Open File History from Control Panel. Search for Control Panel in the Start menu and open it. Go to the System and Security category, then click File History. [1]
Select the drive if needed, then click Turn on. If Windows finds more than one suitable location, pick the drive you want to use first. Then click the Turn on button on the File History pane.
Confirm the status. The File History page should now say it is on, and your connected drive appears as the backup destination.
Once it is on, File History saves copies of the files in your user folders, such as Pictures, Music, Documents and Videos. [4] By default it covers everything in your home directory, which is C:\Users\Username. [1]
A good example: if you plug in a 1 TB USB drive and click Turn on, your Documents and Pictures folders begin saving to that drive. You can then choose from several saved versions of a file, not just the latest one. [4]
How does it differ in Windows 10?
Windows 10 reaches File History through the Settings app rather than starting in Control Panel. The result is the same: a drive is added and File History starts saving versions of your files. You may also find this useful: How to Reconnect a File History Drive in Windows 11 and 10.
Plug in your external hard drive. It can be formatted as FAT32 or NTFS. [2]
Open Settings by pressing Windows key + I. [2]
Go to Update & Security > Backup. [2]
Under “Back up using File History,” click Add a drive. [2]
Windows scans for connected external drives and lists them. Select your drive from the flyout menu. [2]
Once you pick the drive, File History is switched on and the backup options page appears.
The Control Panel route also works
The File History page in Control Panel is available in Windows 10 as well, so you can use the same Control Panel steps described for Windows 11. [4] This is handy if you prefer one routine on both PCs, or if you can’t find the Backup page in Settings.
Windows 10 end of support
Windows 10 is at or near the end of Microsoft’s support, so it will not keep receiving the same updates as Windows 11. File History itself is not new: Microsoft introduced it in Windows 8 in 2012 and has updated it since. [5] If your PC can run Windows 11, upgrading is worth planning, and your File History setup steps will stay very familiar.
How do you choose which folders are backed up?
You choose folders from the File History settings in Control Panel, and the same screen lets you set the schedule. The steps below assume File History is already on.
By default, File History backs up the folders in your user folder (C:\Users\Username), including documents, music, pictures, videos and the desktop. [1]
Open Control Panel, go to System and Security, and click File History. [1]
To skip a folder, choose the exclude folders option in the File History menu and add the folder you don’t need. A large video folder is a typical example. [4]
To include something extra, use the option to add new folders in the File History menu and pick the folder. [4]
Open Advanced settings to change how often files are saved. In Windows 8, the same screen offered choices from every 20 minutes to once a day, and the default was every hour. [6]
In the same area, set the version frequency and saving schedule that suit you. [4] File History keeps multiple versions of a file over time, so you can pick an older one if you overwrite a document by mistake. [4]
The folder list now reflects your changes, and the next backup follows the new schedule.
Files outside your user folders
File History is built mainly for personal files in your user folders such as Pictures, Music, Documents and Videos. [4] You can change the folder list to include other items, so a work folder at D:\Projects needs a manual add. [4]
It also cannot create a System Image backup. [4] If you need a copy of the whole system, you need a different tool.
Why won’t File History turn on?
The most common reason File History won’t turn on is simple: Windows can’t find a drive to save to. Without one, the feature stays off on its own. [1]
No suitable drive is connected
File History can only back up to an externally connected drive, such as a USB drive, or to a network drive. [1] If neither is available, it won’t run. [1]
For example, if your PC has only its internal disk and nothing plugged in, the Turn on button won’t do anything useful. Connect an external drive first, then reopen File History in Control Panel.
The drive was unplugged later
If File History was working and you later unplug the drive, it will warn you that the drive is disconnected. Backups can’t continue until the drive is available again. Reconnecting or reselecting the drive is a separate task, covered in our reconnect guide.
Group policy can disable it
File History can be controlled from the Control Panel or from the local group policy editor. [1] If an administrator, or a setting on your own PC, has turned the feature off through policy, the usual steps won’t work. This is most likely on work or school computers, where the organization sets the rules.
If you have a drive connected and File History still refuses to start, a policy setting is the next thing to suspect. On a managed device, ask your IT administrator rather than changing it yourself.
Common questions about File History
Does File History back up the whole PC?
No. File History only backs up specific files and folders, not the whole drive. [5] It focuses on personal folders such as Documents, Music, Pictures, Videos, Desktop and offline OneDrive files. [5]
It also can’t create a system image backup. If your system fails, you have to reinstall Windows first and then recover your files from the File History backup. [4]
Can I use a USB flash drive?
Yes. You can connect an external drive or a flash drive as the backup location. [4] A network location also works. [4]
Keep in mind that an internal backup would be lost along with everything else if the whole system fails, so a separate drive is the safer choice. [4]
How do I restore files?
Open the File History menu and pick the version you want, because File History keeps multiple versions of your files over time. [4] That helps if you accidentally overwrite a document and want an earlier copy. [4] The separate guide on how to restore files from File History walks through the full process.
What should you do next?
Remember the order: connect a separate drive, turn File History on, then decide which folders it saves. Once it is running, it keeps versions of your personal files without further effort.
Your next step is simple: plug in a USB or external drive and turn File History on in Control Panel today. File History only works while a suitable drive is available, so it stays off or pauses without one [1]. Every so often, glance at the File History page to make sure the drive is still connected and the status still shows it is on.
