How to Reconnect a File History Drive in Windows 11 and 10

Seeing a warning that File History needs its drive reconnected? Here is what it means and how to get backups running again in Windows 11 and 10.

A black portable external hard drive connected by a USB cable to an open laptop on a wooden coffee table beside a stack of books.
In this article

Plug the original File History drive back into your PC, and in most cases backups pick up where they left off. If the warning stays, reselect the drive in File History settings so Windows links to it again. You may also find this useful: How to Enable File History in Windows 11 and 10.

When you reconnect your File History drive, Windows saves copies of changed files again once it recognizes the drive. The warning text itself says to reconnect the drive and then click to keep saving copies of your files. [1]

If the warning keeps coming back, check the backup drive for bad sectors with the chkdsk command, since an old drive with bad sectors may need to be replaced with another one. [1]

Key takeaways

  • Reconnect the original drive first.

  • If the warning stays, reselect the drive in File History settings.

  • Backups resume once Windows recognizes the drive.

What does the File History reconnect warning mean?

The reconnect warning means Windows can no longer reach the drive that File History saves your backups to. The message reads “Your File History drive was disconnected for too long. Reconnect it and then tap or click to keep saving copies of your files.” [1]

What File History does

File History watches your personal files. Whenever it detects a change, it stores a copy of the updated file on the File History drive. [1] That drive is separate from your main disk, usually an external USB drive, so the copies survive if the PC has a problem.

Why the warning appears

The warning shows up when the backup drive has been unplugged, is offline, or has been unavailable for too long. [2] A common example: you set up File History, then unplug the external drive to carry a laptop around. Weeks later you open the settings and see the “Reconnect your drive” message. [2]

What it does and doesn’t affect

The warning is about new backups, not old ones. Copies already saved on the drive are not what triggered it. Only the saving of fresh copies pauses until Windows can reach the drive again. Until then, files you edit are not being added to the backup.

Related errors

You may also meet a similar message, “No usable drives found,” in the File History settings. [3] It points to the same kind of problem: Windows has no drive available to use for File History. Reconnecting the original drive or choosing another one are the standard fixes, and the steps for both come next. [3]

What should you check before reconnecting?

Before you change any settings, make sure Windows can actually see the drive File History was using. Most reconnect warnings clear once the original drive is back and recognized.

Confirm the same drive is plugged in

Plug in the drive you originally chose for File History, not a similar one. Then open File Explorer and look for it under This PC. If it appears with its usual name and letter, Windows sees it and you can move on.

If it doesn’t appear, the problem is the connection, not File History. Settings can’t reselect a drive Windows can’t see.

Try another USB port or cable

A loose or worn connection is a common reason a drive drops out. Move the drive to a different USB port on the PC, preferably one directly on the computer rather than a hub. If you have a spare cable, swap that in too. Then check File Explorer again.

This matters because the warning says the drive was disconnected for too long [2]. A drive that keeps dropping out can trigger it again later.

Know which menus you’ll see

The menu path differs by Windows version, and that trips people up. One Windows 11 user followed instructions that said to open Update & Security, but saw Privacy & security instead, with no Backup entry under it [4].

  • Windows 11: Don’t look for Update & Security. Open Settings and search for Backup, as that user did, since the Backup option didn’t appear under Privacy & security [4].

  • Windows 10: Backup sits under Update & Security in Settings. The usual route is Settings > Update & Security > Backup [4].

If you’re still on it, consider planning a move to Windows 11.

How do you reconnect your File History drive?

Reconnecting comes down to four steps in Settings: open the backup area, open the drive’s More options, pick the drive, and turn File History back on. The wording differs a little between builds, so use the closest match on your screen.

  1. Open Settings. Go to the Start menu and select the gear icon. In Windows 10, click Update & Security, then Backup in the left sidebar. [4] In Windows 11 you won’t see Update & Security; the backup options sit under a different area, and one Windows 11 user reported no Backup entry under Privacy & security. [4] If you can’t find it, search for “Backup” in Settings.

  2. Find the File History drive entry. Look for the “File History Drives” section, click the drive you want to reconnect, then select More options. [4]

  3. Reconnect or select the drive. Choose “Reconnect drive” and follow the on-screen instructions. [4] If the original drive isn’t offered, pick a different drive from the list of available drives. [3]

  4. Turn File History on and run a backup. Make sure the File History switch is on, then click Back up now in More options so a fresh copy starts right away.

For example, if your external drive was unplugged over a weekend, plug it in, open Backup, choose the drive, and run Back up now. The warning to reconnect your drive tells you to reconnect it and then click to keep saving copies of your files, so following the prompt is the right move. [1]

When the folder list and the last backup time update, File History is working again.

What if the old drive is gone or not listed?

If the original drive is gone, broken or never shows up, pick a different drive instead of waiting for the old one. File History lets you select another drive when the first one is unavailable, and backups can then continue on the new target. [3] For the next step, see How to Switch File History to a New Drive in Windows.

The reconnect prompt and the drive selection both live in the same File History settings, so you do not need a separate tool. Choose the option to select a drive, then pick the replacement from the list. [3]

Why a drive may not appear in the list

The drive has to be recognized by Windows before File History can offer it. If Windows does not see the drive, it will not be listed, and you may end up at a “no usable drives found” message instead. [3]

If your replacement drive is missing from the list, work on getting Windows to detect it first. Try plugging it in again, using a different USB port, and checking whether it shows up in File Explorer. Once it appears there, return to File History and look again.

When the old drive is the problem

Sometimes the old drive is the reason the warning keeps returning. One troubleshooting write-up suggests checking the backup drive for bad sectors with the chkdsk command. [1]

If the drive is old and has bad sectors, the same write-up says you will need to use another drive for backups with File History. [1] In that case, switching is the sensible fix rather than another reconnect attempt.

Moving to a new drive

Picking a new drive raises a few questions, such as what happens to the backups already stored on the old one. Those details are covered in the separate walkthrough on switching File History to a new drive.

Why does the warning keep coming back?

If the warning returns after you reconnect, the cause is usually the connection, the wrong drive, or a drive that is failing. Work through these in order.

A loose cable or a drive that sleeps

An unstable link is the most common repeat offender. A wobbly USB cable or a worn port can drop the drive for a moment, and File History then flags it as disconnected. Plug the drive directly into the PC, not through a hub, and use a cable you trust.

Power saving can cause the same symptom. Windows can suspend USB devices to save power, and a backup drive that goes to sleep may look disconnected. One troubleshooting guide lists disabling USB Selective Suspend as a fix for this. [2]

Reconnecting a different drive by accident

If you own several external drives, it is easy to plug in the wrong one. File History looks for the drive it was set up with, so a different drive will not clear the warning. Another guide lists reassigning the correct drive letter as a fix, which matters when Windows hands your backup drive a new letter. [2]

A quick test: open File Explorer and make sure the drive you plugged in is the one you originally chose for backups.

When the warning persists

If the drive is the right one, connected firmly, and the warning still comes back, the problem is deeper. Two fixes are worth trying next:

  • Reset the File History configuration. [2]

  • Check the drive for errors. [2]

A failing drive is a real possibility. One walkthrough suggests running the chkdsk command on the backup drive and looking at the bad sector figure in the results. [1] If the drive is old and has bad sectors, you will need a different drive for File History. [1]

In one reported case, a user reconnected as the notification instructed, started the backup again, and the notification returned after a while. That pattern points to the drive, not the cable. [1]

Next steps once backups are running

Once the warning is gone, the one thing to remember is that File History only protects you while its drive is connected. Open the Backup settings and look at the last backup time. In the forum thread, the user could see the last backup was two days earlier, which is a quick way to tell whether copies are really running. [4]

Plug the drive in on a regular schedule, such as at the start of each work day, so new copies never pause for long. If you ever lose a file, restoring it from the reconnected drive is the next step.

Sources

  1. How To Change File History Drive In Windows 10

  2. How to Tell If Your Drive Is Really DisconnectedStep-by-Step Fixes to Reconnect Your File History

  3. Solution 2: Reconnect Your File History Drive or Select Another Drive

  4. Problems with reconnecting file history drive