How to Pin a File Path to Quick Access in Windows

Pinning a folder to Quick access keeps it in File Explorer’s navigation pane, one click away. Here is how to do it in Windows 11 and 10, including drives, network locations and renaming.

Windows File Explorer showing the Quick access pane outlined in red and a right-click menu on the PSTools folder in D:\Share\tools.
In this article

Yes, you can pin a folder path to Quick access, and it stays in the File Explorer navigation pane until you remove it. Quick access normally shows folders you use often and files you opened recently, and that list updates on its own. A pinned location is different: it is added by you and shows permanently in the Navigation pane. [1] For the next step, see How to Pin File Explorer to Taskbar in Windows 11 and 10.

Pinning is not limited to folders. Drives and libraries can be pinned too. [1] The same method works on Windows 11 and Windows 10. [2] For a closer look, read How to Pin a File to the Taskbar in Windows 11 and 10.

Below you will see what to know first, the step-by-step pin, other ways to pin a location, how to give a pinned folder a different name, and how to unpin it later.

What should you know before pinning?

Quick access is a mix of automatic and manual items, so it helps to know which is which before you pin anything. When you open File Explorer, it shows the folders you use most and the files you recently opened. [1] That list is dynamic and updates as you use different items. [1]

A frequent folder can drop off the list when your habits change. A pinned location does not: it shows permanently in File Explorer’s Navigation pane. [1] If you want a spot to stay put, pin it rather than waiting for it to appear as frequent.

Pin the folder, not the file

If you are thinking of a file path, pin the folder that contains the file. The pin option is described for folders, and the same steps also work for drives and libraries. [1] For example, to reach C:\Test folder\Folder 1\Pin me\report.docx quickly, pin the Pin me folder and open the file from there.

One quirk to expect: pinned folders show only their own name. If several folders share a name, such as four folders called “Pin me” in different parents, they all appear under the same name, and you can’t tell them apart without clicking. [3] Quick access also has no right-click option to rename a pinned item. [3]

Windows 11 and Windows 10

Windows 10 has reached end of support, but the pinning steps are the same as in Windows 11, since File Explorer in both uses the same Quick access feature. [2]

  • Windows 11: right-click the folder and choose Pin to Quick access. The Windows 11 menu may need Show more options before the command appears.

  • Windows 10: right-click the folder, and Pin to Quick access is in the first section of the menu. [1]

How do you pin a folder to Quick access step by step?

You pin a folder to Quick access by right-clicking it in File Explorer and choosing Pin to Quick access. It takes a few seconds.

  1. Open File Explorer and go to the folder you want to pin. [4] For example, open your Documents folder and browse to a project folder inside it.

  2. Select the folder, then right-click it (or press and hold on a touchscreen). [1] The context menu opens.

  3. Select Pin to Quick access from the context menu. [4] The option appears in the first section of the menu. [1]

  4. Look at the Navigation pane on the left. The folder is now pinned and can be reached from the Quick access folder and from the Quick access shortcuts in the pane. [1]

A shortcut if the folder is already open

If you are already inside the folder, you do not need to go back up and select it. Right-click the Quick access shortcut in the Navigation pane on the left. [1] Then choose Pin current folder to Quick access, and the folder is added to the section. [1]

This is handy when you have just dug through several levels of folders and want to keep that spot handy without retracing your steps.

Are there other ways to pin a location?

Yes. The same right-click method works for more than ordinary folders, and a few special cases are worth knowing.

Drives and libraries

Drives and libraries can be pinned to Quick access just like folders. [1] Open This PC, right-click a drive, and choose Pin to Quick access. The drive then sits in the navigation pane next to your pinned folders.

Libraries work the same way. If you don’t see your libraries in the navigation pane, the Digital Citizen tutorial points to a trick for reaching them more easily before pinning. [1]

Pin the folder you already have open

If the folder is already open in File Explorer, you don’t need to go looking for it again. Right-click the Quick access shortcut in the navigation pane on the left, then choose Pin current folder to Quick access. [1]

Network drives

A network drive can be treated as a folder, so you can pin it the same way. Open the shared drive in File Explorer, go to the folder you want, and use the same right-click command. [5]

If you only have the path, click the white space to the right of the folder path in the address bar, then copy it. [5] You can paste it into Notepad to keep it handy while you navigate there.

Don’t confuse this with “Pin to Start.” That command is a different feature, and it creates a tile on the Start screen rather than a Quick access entry. [5]

When you can’t open the parent folder

People do run into this: you want to pin a folder, but you can’t browse to it because you have no access to its parent folder. The question comes up often enough that it has been asked on Super User, where the asker notes that right-clicking and choosing Pin to Quick Access is the usual route. [6]

That usual route assumes you can see the folder in File Explorer. If the folder is the highest level one you can reach, or you only have its full path, start by opening that folder directly. Once it is open, use Pin current folder to Quick access from the Quick access shortcut. [1]

Can you rename a pinned folder?

No, Quick access has no rename option for pinned items, but you can work around it with a junction. A junction is a folder that points to the original, so you pin the junction under the name you want. This helps when several folders share a name, such as four folders all called “Pin me”. [3]

The mklink command creates the junction. It does not move or delete the original folder, but type both paths carefully, because a typo points the junction at the wrong place or fails.

  1. Open Command Prompt.

  2. Run this command, replacing the new name and the original path with your own:

mklink /J "%userprofile%\Pinned Folders\New Name for Folder" "c:\path to original\folder you want to pin to Quick Access"

/J makes a junction. The first path is the junction, created in a Pinned Folders folder in your user profile (c:\Users\your_user_name\Pinned Folders). The second path is the original folder. [3]

  1. In File Explorer, open the new junction folder from the Pinned Folders location.

  2. Pin the junction to Quick access, using the same right-click Pin to Quick access command you use for any folder.

Quick access now shows the junction’s name instead of the original folder’s name.

Example

Suppose you have a folder named “Pin me” in several places, such as C:\Test folder\Folder 1\Pin me. This command creates a junction called “Pin me 1” for it: [3]

mklink /J "%userprofile%\Pinned Folders\Pin me 1" "C:\Test folder\Folder 1\Pin me"

Repeat the command with a different name and path for each folder, such as “Pin me 2” for C:\Test folder\Folder 2\Pin me. Pin each junction, and the entries in Quick access are now easy to tell apart. [3]

How do you unpin an item later?

You unpin an item from the same place you pinned it: the Quick access list in File Explorer’s navigation pane. It takes two clicks, and your files stay where they are.

Steps to unpin

  1. Open File Explorer.

  2. In the navigation pane on the left, find the pinned item under Quick access.

  3. Right-click it (or press and hold on a touch screen).

  4. Choose Unpin from Quick access.

The item disappears from the navigation pane right away. A pinned folder, drive or library can be removed this way, since all of them can be pinned in the first place. [1]

What happens to the original folder

Unpinning only removes the shortcut from Quick access. The original folder, drive or library is not moved, renamed or deleted, and everything inside it stays exactly as it was. You can open it again from its usual location.

You can also pin it again at any time with the same right-click Pin to Quick access command. [1]

A practical example

Say you pinned a folder called “Tax 2024” for a few weeks of paperwork. Once you are done, right-click it under Quick access and choose Unpin from Quick access. Your navigation pane is tidy again, and the folder still sits in Documents, ready if you need it next year.

If an unpinned folder is one you open often, it may still show up in the automatic list of frequent folders, because that list updates itself as you use different items. [1]

Quick recap

To pin a file path, right-click its folder in File Explorer and choose Pin to Quick access. [4] That one step puts the location in the navigation pane, one click away.

If several pinned folders share a name, create a junction with mklink /J and pin that instead, because Quick access has no rename option for pinned items. [3] When you no longer need a pinned location, unpin it from the same right-click menu. Your next step is to pick the folder you open most often and pin it now.

Sources

  1. When you start File Explorer, it displays the Quick access location, listing the folders you use…

  2. File Explorer in Windows

  3. The Quick Access location is a new folder in File Explorer of Windows 10. It is where Explorer…

  4. Pin folder in File Explorer on open

  5. How do I pin a network drive to quick access?

  6. How do I pin a folder to quick access if I don’t have …