To copy a folder structure without files in Windows, use a built-in command-line method when you want repeatable control over the folder tree. If you would rather set up the task visually, a synchronization app is another option. Both approaches are for recreating folders only—not transferring the files inside them. To go further, see Robocopy: Copy Folder Structure Only, Not Files.
The right starting point depends on how you prefer to work: commands offer direct control, while an app can provide a visual setup. For example, you might recreate a project’s folder layout on a new drive while leaving documents and other contents behind. Pick the command line if you want direct control, or a backup tool such as SyncBackFree if you prefer a visual setup.
At a glance
Choose a command-line method if you want a built-in option you can run again for similar folder-tree tasks.
Consider a synchronization app if you are more comfortable configuring the task through a visual workflow. SyncBackFree is one example of an app used for copying folders without files.[1]
Keep the goal in view: create the directory layout without copying the files it contains. A ViceVersa profile is one example described for copying folder structure between locations without files.[2]
Think of a folder tree like a filing cabinet’s labeled drawers: the aim is to reproduce the labels and arrangement, not move the papers inside. That distinction matters if you need a clean template for a new project or want the same folder layout in another location. Start with the command approach for repeatable control, or consider a visual app if that setup feels more comfortable.
How the folder-only methods compare
Method | Ease of use | Control over empty folders | Suitability for repeat runs |
|---|---|---|---|
Built-in command-line tools | You enter a command, so this fits best if you are comfortable working in a terminal. | You can control whether empty folders are included with the command options. [3] | A saved command can be run again with the same paths, making this a direct option for recurring tasks. |
Third-party synchronization software | A visual setup may feel more approachable if you would rather configure options than type a command. SyncBackFree is one example of software described for copying folders without files. [1] | Settings depend on the software and configuration; a ViceVersa profile is described for copying a folder structure without files. [2] | A saved profile can give you a repeatable setup, though you should review its settings before reusing it. |
The main tradeoff is how you prefer to set up the job: a command offers direct control, while synchronization software provides a visual configuration path. For recurring copies, either a saved command or a profile can make the setup reusable; your comfort with the workflow is a useful deciding factor.
For example, if you need the same department folder tree in a new location each month, a command may suit you if you are comfortable keeping its paths correct. If you prefer choosing settings through an app, a synchronization profile may be easier to work with. The best fit is the method whose setup you can repeat carefully, including the choice about empty folders.
Ease of use is personal, so the table compares the setup style rather than claiming one method is universally simpler. A command is concise once prepared, but editing paths by hand can be less comfortable if you rarely use command-line tools. A visual profile takes configuration, but its saved setup can be handy when you run a similar job again.
Empty-folder handling is a point to compare before choosing. The command-line approach exposes an option for including empty folders [3], while the software examples are configured through their own profile or settings [2][1]. If your tree contains intentionally blank folders—for example, placeholders for next quarter’s projects—make sure your chosen setup preserves them.
For repeated work, avoid treating the method as a one-time choice: consider how you will reuse the setup and keep its destination appropriate. A saved command or profile is only useful if you can recognize which source and destination it applies to, especially when you maintain separate trees for teams or projects.
When should you use a built-in Windows command?
The built-in Windows xcopy command is useful when you want to create a folder tree from an existing one and control whether empty folders are included. Its /T option copies the folder structure without copying files, while /E includes empty folders in the copy. [3] Learn more in How to Copy Folder Structure With Files in Windows.
What /T and /E do
Use /T when the destination should mirror the source’s folder hierarchy but not contain the source files. For example, if your source has Projects\2025\Drafts and Projects\2025\Final, the option is intended to recreate those folder paths without bringing over the documents inside them. [3]
Add /E when empty folders matter too. A folder such as Projects\Archive may have no files now but still be part of the structure you need; /E includes empty folders in the copy. [3]
Review the paths before running the command
Before you run a command, check which path is the source and which is the destination. For example, if C:\Work\Template is the source and D:\NewWork is the destination, make sure the command points to those locations in that order so you do not create the tree in the wrong place.
Read the full command from left to right and inspect both paths for typos, missing folder names, or an unintended drive letter. If you are adapting a command you found elsewhere, replace its example paths with the exact folders you intend to use, then review them again before pressing Enter.
You can also open the source and destination locations in File Explorer first to confirm that the names and parent folders match your plan. Keep the destination path specific—for example, use D:\NewWork\TemplateCopy if you want the copied hierarchy inside a new folder rather than directly under D:\NewWork.
Treat the final path check as part of the command, not an afterthought: /T controls what gets copied, but it does not correct a mistyped destination. Once both paths are right, include /T and, if you need empty directories, /E. [3]
Would a folder-sync app be easier?
A synchronization app can create a folder structure without copying files when you configure its profile for that purpose. This visual approach may suit you if you would rather set up and review a profile than work directly with a command.
For example, ViceVersa’s instructions describe creating a profile to replicate a folder structure between locations, such as C:\source and D:\target. [2] SyncBackFree is another example covered in a tutorial about copying folders without files in Windows. [1] These are examples, not the only apps you could consider.
Set up and review a profile
Choose the source folder that contains the hierarchy you want to reproduce, then set the destination where you want the new structure. For a project folder, that might mean selecting C:\Projects\Website as the source and a separate working location as the destination. Avoid selecting a destination that contains files or folders you need to preserve.
Next, look for the profile settings that control what gets copied, and configure the profile for structure-only copying. The exact setting names and available options can differ between apps, so check the current settings rather than assuming a profile will omit files by default.
Before applying the profile, review the source and destination shown in its summary. Make sure the destination is the intended location, and check that the profile is set to copy the folder structure without file contents. If the destination is wrong, correct it before you apply the profile.
This extra review is useful when a saved profile will be reused: a profile can keep your setup ready, but you still want its current source, destination, and copy settings to match the task. For example, if you are preparing a clean project layout in a new workspace, confirm that the profile points to that workspace—not to a live folder you use for other work—before starting.
How can you check the copied folder tree?
Open the destination in File Explorer and compare its visible folder hierarchy with the source so you can spot missing or misplaced folders. [4] Then check required empty folders and confirm that no files were copied if you wanted a folders-only result. [3]
Compare the folder hierarchy
Open the source and destination in separate File Explorer windows, then expand the folders you need to check. For example, if the source shows Projects > North > Drafts, look for the same parent-and-child sequence in the destination. Compare one branch at a time rather than trying to scan the entire tree at once.
A matching top-level folder is not enough by itself: open it and inspect the levels below it. If a branch such as Projects > North > Drafts stops at Projects > North, the destination does not show the full hierarchy you expected. Use the same approach for other important branches, such as Clients > Acme > Archive.
Check empty folders and files
Look for empty folders that matter to your workflow, such as Templates, Incoming, or Archive. They may not contain anything to display, so verify that the folder itself appears at the correct place in the destination. A missing empty folder can be easy to overlook when you only check folders that already contain visible items.
For a folders-only result, inspect a few destination branches and confirm they contain folders but no copied documents, photos, or other files. For instance, open Projects > North > Drafts and check that the expected folder is present while its file list is empty. Repeat that check in other branches where files would cause confusion.
If the destination is large, work from the top down: check each main folder, then open the key subfolders beneath it. This makes it easier to catch a missing level or an unexpected file without treating a similar-looking top-level view as proof that every branch is complete. Finish by checking the folders you rely on most, such as a project’s Drafts and Final folders, in their expected locations.
Frequently Asked Questions
How do I copy a folder structure without files in Windows?
Use the built-in command-line method with the /T option to recreate the folder hierarchy without copying files. Add /E if you also need empty folders included. Before running the command, check that the source and destination paths are correct, then open the destination in File Explorer and compare its folders with the source.
What do the /T and /E options do when copying folders?
The /T option copies the folder structure without copying the files inside it. Add /E to include empty folders in the copied tree. For example, if an empty Archive folder is part of the layout you need, /E helps preserve it. Check the destination afterward to confirm the expected folders appear and no files were copied.
Can I copy a folder structure without files using a visual app?
Yes. A synchronization app can do this when you configure its profile for structure-only copying. The article gives ViceVersa and SyncBackFree as examples. Choose the source and destination, review the profile’s copy settings, and confirm the paths before applying it. Settings can differ between apps, so do not assume a profile omits files by default.
How can I check that the copied folder tree is correct?
Open the source and destination in separate File Explorer windows and compare the hierarchy one branch at a time. Check important parent-and-child paths, then look for any empty folders you need. Open a few destination folders to confirm they contain no copied files if you wanted a folders-only result. Fix missing or misplaced folders before using the tree.
Which method should you choose?
Choose the method you can repeat confidently, then verify the destination before you build on it. For a direct, repeatable copy of a folder tree, use the built-in command method; if you prefer setting up a visual workflow, choose a synchronization tool that supports a profile-based setup. [3][2][1]
Pick the method that fits your workflow
A command is a practical choice when you want to run the same folder-tree task again, such as preparing matching project folders for each new client. The /T option copies the folder structure without files, and /E includes empty folders, so you can tailor the tree to what the next project needs. [3]
A visual tool may feel more comfortable if you would rather configure a profile than work at a command prompt. ViceVersa describes using a profile to copy a folder structure between locations, and SyncBackFree is another cited example of a synchronization tool for this task. [2][1] For instance, you might set up a profile for a recurring project template, then use the same approach when you need that layout again.
Make the destination your final check
Before relying on the new tree, open the destination in File Explorer and compare its visible hierarchy with the source. If the layout is for a client project, check that the expected branches—such as Documents, Invoices, and Images—appear where you planned them.
Also check for any empty folders your workflow needs, such as a blank Archive folder ready for later use. If a folder is missing or appears in the wrong place, fix the destination before using it as a template for more work. Treat the copied tree as a starting point, not a substitute for checking that it matches your intended layout.
For a one-off task, choose the method you can set up and inspect comfortably. For repeat work, settle on one approach and verify the destination each time before relying on it.
