How to Burn ISO to USB in Windows 11 (Bootable Drive)

Burning an ISO to USB means making the drive bootable, not just copying the file. This guide shows two ways to do it in Windows 11 and what to check first.

A person types on a laptop with a teal USB flash drive plugged into its side and a red one lying on the desk beside it.
In this article

No, copying an ISO file onto a USB drive will not give you a bootable drive. To burn an ISO to USB in Windows 11, you have to write the image so the drive can start a PC, and dragging the file over only leaves a large file sitting on the drive.

There are two routes: a dedicated ISO-to-USB tool or Command Prompt. [1] Microsoft’s media creation tool and third-party software like Rufus are examples of tools. [2] To go further, see How to Install an ISO File in Windows 11: Two Routes.

Either way, the process formats the USB, so anything already on it is erased. [2] This article walks through both routes, what can go wrong, and how to boot from the finished drive.

What do you need before you start?

You need three things before you burn an ISO: the ISO image itself, a USB drive with enough space, and a Windows computer to do the work.

What is a Windows 11 ISO?

A Windows 11 ISO is a disk image that contains all the files needed to install the operating system on a computer. [2] You can download it from the official Microsoft website. [2] Think of it as a single-file copy of the installation disc. It also helps to read How to Extract an ISO File Without Mounting It.

What to have ready

  • A Windows 11 ISO image. Microsoft’s own site is the safest place to get one. [2]

  • A USB drive of at least 8 GB. [2] A 4 GB stick you have lying around in a drawer will not be enough.

  • A PC running Windows 11. You need a Windows computer to carry out the process. [2]

  • A burning tool. You can use Microsoft’s media creation tool or third-party software such as Rufus. [2]

Decide what you are doing

A bootable drive serves a few different jobs. You need to burn the ISO to USB when you want a clean installation of Windows 11, or when you need to repair or reinstall the operating system. [2]

For example, if your PC no longer starts properly, this drive is what you boot from to repair or reinstall. If you are setting up a new machine, the same drive does a clean install. Knowing which one you want now saves you from guessing later at the boot screen.

Using Windows 10?

The process is the same on Windows 10, and the same burning methods work on Windows 11, 10, 8 and 7. [1] Windows 10 has reached its end of support, so Windows 11 is the better system to build the drive on where your PC allows it.

Two black USB flash drives with USB-A and USB-C connectors lie on a gray surface beside a laptop with one plugged in.

How do you burn an ISO to USB with a tool?

A dedicated tool is the simplest route if you would rather click than type commands. The steps below use the free ISO to USB tool, which the source describes as a straightforward way to burn a bootable ISO to a USB drive. [3]

Warning: the tool formats your USB drive before it copies the setup files, so everything on the drive is erased. [3] Copy anything you want to keep to another location first.

  1. Download the ISO to USB setup file, install it, and run it with admin rights. [3] Right-click the program and choose Run as administrator.

  2. Click the browse button, find your ISO file, and click Open to load it. [3]

  3. Select your USB drive from the drop-down menu. Double-check the choice, because the wrong drive will be formatted. [3]

  4. Choose FAT32 or NTFS as the file system and enter a volume label of no more than 11 characters. [3]

  5. Select the bootable option. [3]

  6. Click the Burn button. When the warning “burning will erase all data on USB” appears, click Ok to proceed. [3]

  7. Wait while the files transfer. [3]

The transfer can take a while, and the title bar may show “not responding.” Don’t close the program when that happens. [3]

Leave the drive plugged in until you see the “successfully completed” message. [3] Only then is it safe to remove the drive and use it to boot a PC.

Can you make the USB bootable with Command Prompt?

Yes. Using Command Prompt to transfer all the setup files to a USB drive is the easiest and best way to make a bootable drive, even though many users find it difficult. [3] It suits you if you are comfortable typing commands and would rather not install extra software.

Who should choose this method

Pick Command Prompt if you are happy following typed instructions step by step and want to avoid adding another program to your PC. If typed commands make you nervous, the tool route covered earlier is the gentler option, since a single wrong entry in a command window is easier to make than a wrong click.

The general flow

The source describes the method only as using Command Prompt to transfer all the setup files to the USB drive. [3] It does not list the individual commands, so the exact syntax for each step is in Microsoft’s documentation for the diskpart tool, which is the usual disk-preparation tool in Command Prompt.

  1. Open the Start menu, type cmd, and choose Run as administrator so Command Prompt has the rights it needs.

  2. Prepare the USB drive using the documented diskpart commands, making sure you select the USB drive and not your main drive.

  3. Open your Windows 11 ISO by double-clicking it, which mounts it as a virtual drive in File Explorer.

  4. Copy all the files from the mounted ISO to the USB drive.

  5. Wait for the copy to finish before you remove the drive.

When the copy ends, the USB drive’s root folder shows the same files and folders as the mounted ISO.

A practical example

Suppose you are repairing a family laptop and your only spare drive is an 8 GB flash drive. You have no wish to install a new program on a PC you do not own. Command Prompt lets you build the installer with only what Windows already provides.

Does this work for Linux ISOs too?

Yes, the idea is the same for Linux: you write the image to the drive so it boots, rather than copying the file onto it. The catch is that the tool you use matters.

A user on a Microsoft community forum asked this exact question. They had tried the official Windows Media Creation Tool to make a Linux USB, and the drive was not recognized as a bootable device. [4]

The reply they got explains why: the Media Creation Tool cannot burn a Linux ISO to USB because the partition scheme is totally different. [4] That tool is built for Windows images, so a Linux ISO needs something else.

What a Linux boot drive needs

A Linux boot disk works by writing the kernel and the initialization program (Initramfs) to the boot partition of the USB device, so the computer loads them first at startup. [4] A Linux bootloader also expects a specific partition structure, for example a FAT32 boot partition plus an Ext4 root partition. [4] A tool made for Windows media will not build that layout.

What to do instead

Use an ISO-writing tool that supports Linux images, and follow the same basic flow you would for Windows:

  1. Download the Linux ISO.

  2. Prepare a USB drive.

  3. Burn the ISO to the drive with the tool.

  4. Boot from the USB and start the Linux installation. [4]

The same thread notes this works for Ubuntu and other Linux distributions. [4] A Command Prompt route also exists. The forum replies mention diskpart for finding the USB disk number (such as Disk 2) and clearing its read-only attribute. [4] That path is more hands-on, so most beginners will find a dedicated tool easier.

If your Linux USB won’t boot, the first thing to suspect is the tool, not the drive.

What mistakes keep the USB from booting?

Three mistakes account for most drives that refuse to boot: copying instead of burning, using a tool built for a different image, and pulling the drive too soon.

Copying the ISO file instead of burning it

An ISO sitting on a USB drive as a single file is just a file. The firmware needs the image’s contents written so the drive itself is bootable, so use a burning tool or Command Prompt rather than drag and drop. If the drive opens in File Explorer and shows one large .iso file, it was copied, not burned.

Using the wrong tool for the image type

A tool made for Windows media does not suit every image. One user reported that a USB made with the Windows Media Creation Tool was not recognized as a bootable device when the image was Linux. [4] A reply explained that the Windows 11/10 Media Creation Tool cannot burn a Linux ISO to USB because the partition scheme is totally different. [4]

The fix is to match the tool to the image. For a Linux ISO, use an ISO-writing tool or the command-line route rather than the Windows installer tool.

Removing the drive before the burn finishes

Unplugging the drive while the write is still running can leave it half written and unbootable. Wait until the tool reports that the burn is complete before you eject the drive. If you interrupted a burn, run it again from the start with the same ISO.

Ready to boot from your new USB drive?

Remember one thing: an ISO has to be burned to the USB drive, not copied onto it. Pick whichever route suits you, a dedicated tool such as Rufus if you want a guided process, or Command Prompt if you are comfortable typing commands and would rather not install extra software. [2]

Once the burn finishes, you are ready for the real goal: restart your PC, boot from the USB drive, and start a clean installation, a repair, or a reinstall of Windows. [2] Your next step is simple: plug in the finished drive and boot from it.

Sources

  1. [2 Ways]How to Burn ISO File to USB on Windows 11, 10, 8, 7

  2. How to burn the Windows 11 iso to a USB in Spanish ▷➡️

  3. Burn ISO To USB

  4. How to burn Linux ISO to USB on Windows 11/10 PC?